Graham Slee Bitzie USB DAC/Headphone amp

€ 427,00

Graham Slee Bitzie USB DAC/Headphone amp – Big DAC audio-in miniatura! (Funziona con iPhone6 ??!! – funziona con Windows 10 !! semplicemente funziona con qualsiasi sorgente USB!) Il formato della palma “bus-powered” Bitzie hi-fi USB DAC sarà facilmente abbinare il suono del DAC molto più grandi.

Graham Slee Bitzie USB DAC/Headphone amp

USB input 1 x standard B socket; up to 24 bits and 48kHz sampling frequency (music player software can be made to play higher resolution files)
Digital Outputs 1 x Coax transformer isolated; 1 x Optical; 16 bits and up to 48kHz sampling frequency
Coax
Distortion, THD+N 0.001%
Inter-modulation, SMPTE 0.015%
Frequency response 20Hz – 20kHz +/-0.02dB
S-N ratio 96dB
Optical
Distortion, THD+N 0.001%
Inter-modulation, SMPTE 0.013%
Frequency response 20Hz – 20kHz +/-0.02dB
S-N ratio 96dB
Analogue outputs 1 x 3.5mm jack; 1 x 1/4″ jack; use either for headphones, or 1/4″ jack for line-out via supplied adapter.
Line-out
Maximum output 1.55V rms
Distortion, THD+N 0.01%
Inter-modulation, SMPTE 0.15%
Frequency response 20Hz – 20kHz +/-1dB
S-N ratio 76dB
Output noise (shorted input to stage) -96dB
Headphone out into 32 Ohm
Maximum output 750mV rms
Distortion, THD+N 0.08%
Inter-modulation, SMPTE 0.25%
Frequency response 20Hz – 20kHz +/-1dB
S-N ratio 72dB
Software Plug & play: supported by native drivers built-in to virtually all operating systems
Music player software will need to be loaded on your device, for example: Foobar2000 (FB2K), VLC media player, Google Play (on mobiles)
Music player software can be made to play higher resolution files
For use with Android phones, an On The Go (OTG) adapter cable is normally required
For use with iPhones, a camera adapter is usually required